Joined in 2023 
82 
63 About this deal
In particular this is a good way to get what your motherboard decides to use by default for termination, cad bus, and misc values. This provides a base point where you know what values already work. Perfect and I have one other I have no idea what is and that is Write Row-Column Delay. I always seem to find 5 settings over the years and only ever four are shown that I could find. Any idea what that would be for these? VCORE SOC Voltage set to v1.028 - Could not set to v1.025 as suggested as it seems my BIOS only has .022 and .028 options :( It's a theory that may seems reasonable but I cannot confirm for sure in any way and would be interesting to understand the difference. Interesting to see how the specs for the same part number change over the years. I just bought the "generic "CMK16GX4M2B3200C16" last month and here is my result. They have Samsung chips now:
Corsair Vengeance LPX Black 32GB 3200 MHz AMD Ryzen - Scan
Returning the RAM-kit. The shop tested it and it worked fine for them. They claim they tested on a x570 board with a 3600X. Running Memory Stress Test in Intel Extreme Tuning Utility BSOD if I run for more than 30 min even if XMP is disabled in bios. I am very sorry for my post being so long and please excuse me if my English is not perfect, but it's not my native language. I tried what you described above, but unfortunately it did not help, my system just rebooted after testing with prime95, but there was no BSOD screen.I would also like to hear from other people who may have had the same issue and for which this solution solved this problem (setting the tRC to 56 instead of 54) After switching XMP to auto, the tRC parameter is set to 64 in bios, but in windows alone it sometimes shows higher even over 70. When I turn off the XMP, the tRC should be 50 and this is in bios, but in windows I have tRC 51. Helios EVO (Main Desktop) Intel Core™ i9-10900KF | 32GB DDR4-3000 | GIGABYTE Z590 AORUS ELITE | GeForce RTX 3060 Ti | NZXT H510 | EVGA G5 650W Ryzen 7 3700X Gigabyte X570 UD (bios F20b now) 2x8gb ddr4 Patriot Viper [xmp 2.0] (2133/3200) 16 18 18 36 and 64 < for XMP 3200Mhz. When I have XMP disabled everything works normally, but in windows system events I have "LiveKernelEvent 141". [this error usually means a hardware error/damage] I wonder if any of you have it in connection with the instability of the XMP profile, and not only...
Corsair Vengeance LPX 32GB (2x16GB) 3200MHz C16 DDR4 DRAM Corsair Vengeance LPX 32GB (2x16GB) 3200MHz C16 DDR4 DRAM
With my kit going from DDR4-3200 to DDR4-3400 it wasn't worth it with the looser timings I couldn't seem to trim down, but to my surprise (on the older BIOS) it did allow DDR4-3600 and that fit better with the scaled up timings I had to use anyway.
Generally I've had good results when enabling GearDown and disabling PowerDown with both my LPX and RGB kits and Zen+ and Zen2 CPU's. Keeping DRAM voltage near 1.35v seemed to be a sweet spot as using higher voltages didn't seem to have any improving effects for my RGB kit and keeping SOC between 1.0v and 1.1v. I'm using the same processor and same RAM and have since discovered that this specific 32gb set of RAM isn't on my motherboard's (asus TUF x570) QVL for ryzen 3000 compability. Only CMK16GX4M2B3200C16, in 2x8gb configuration. I also have a kit of 4.32 ram (different model, size, and dual rank) and found it didn't like tRC timings (and some lower tRFC) out of the box and were a bit problematic to get working. I needed to reconfigure ProcODT, RTT, and SOC to push over DDR4-3200 successfully. I specifically want the samsung b-die version (the Vengeance cost ~170€ while others ram modules like G skill Flare X or other modules with samsung b-die chip usually costs 200€+). Intel Core™ i7-8700K (Won at LTX, signed by Dennis) | GIGABYTE Z370 AORUS GAMING 5 | 16GB Team Vulcan DDR4-3000 | Intel UrfpsgonHD 630 | Define C TG | Corsair CX450M
Great Deal 
New Comment